Mounting and commissioning the machine
8 - 5
8.02 Commissioning the machine
● Before commissioning the machine, check the electrical leads for any damage.
● Clean the machine thoroughly and oil it / fill with oil ( see chapter 12 Care and
maintenance ).
● Have specialists ensure that the machine’s motor can be operated with the available
electricity supply and that it is connected correctly to the terminal box. If not, the
machine must not be operated.
8.03 Turning the machine on/off
● Turn the machine on ( see chapter 7.01 On/Off switch ).
To Next Page
Loading...
Need help?
General
