Pfaff 360 User Manual

Depending on the type of work the machine is intended to perform, it can be
suppli ed not only with an ordinary feed dog, but also with feed dogs featur-
ing a coarse or flne tooth cut.
Dropping the Feed Dog
The feed dog is dropped for darning, embroidering and button sewing. To
lower the feed
dog (F ig. 21), turn drop feed control V clockwise (Fig. 22). The
fabric will cease feeding. When the control is flicked back to its normal posi-
tion, the feed dog wi ll show a full too th above the needle plate as it advances
(Fig. 1 9), thus automatically resuming the feeding of the fabric.
fig. 22 Drop feed control
Fig. 21 Feed dog lowered
Stitch Length Regulation
The stitch length di al (F ig. 23) has two graduated sections of the some size,
one from 0 to l, and the other from l to 4. This feature greatly facilitates the
fine regulation of the sti1ch length for satin stitching. The dial can also be
set to any intermedi ate length between the graduation marks.
Figs. 23 & 24 Stitch length dial G with finger-tip control H
13

Pfaff 360 Specifications

General

Brand	Pfaff
Model	360
Category	Sewing Machine
Language	English