Pfaff 360 User Manual

To make two-needle ornamentations and tucks, the machine must be equipped
with a double-needle holder designed for a needle gouge of
5
/6•H, or 2,0 mm
(1 05381 x 2,0). Available at extra cost, this needle holder is secured to the
needle bar by screw d (Fig. 73).
Any machine fitted
to make stitches
1
/-.H wide can also be used for all ordinary
sewing operations without any difficulty.
Rules Your Cu s.tomers Should Know
1. When sewing, the balance wheel should always turn toward you, i.e. coun-
ter-clockwise. Never turn the balance wheel in the opposite direction,
especially after the machine has been threaded.
2. Loy both threads bock under the sewing foot before you begin sewing.
3.
Always raise the toke-up lever to its highest position before you begin and
after you have completed a seam.
4. Never run a threaded machine unless you hove fabric under the presser
foot.
5. Put one or two drops of oil into the hook raceway each day you sew.
6. For all Pfaff sewing machines use only ORIGINAL-PFAFF needles, acces-
sories,
and replacement ports .
Fig. 74 Take· up l ever at its highest position
Fig.
75 Regulating the sewing foot pressure
45

Pfaff 360 Specifications

General

Brand	Pfaff
Model	360
Category	Sewing Machine
Language	English