6.9
CLUTCHING
6
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
16. Install the PVT cover outlet duct and tighten the
clamps.
DRIVE BELT
Belt Removal
1. Remove outer PVT cover as described in PVT
Disassembly.
2. Mark the drive belt direction of rotation so that it can
be installed in the same direction.
NOTE: Belt is normally positioned so that part
numbers are easily read.
3. To remove drive belt, put transmission in gear, apply
brake, pull upward and rearward on belt to open
driven clutch sheaves, pull out and down on belt to slip
over the driven clutch outer sheave.
Inner Cover Bolt Torque (Rear):
12 ft. lbs. (16.6 Nm)
Outer Cover Bolt Torque:
45-50 in.lbs. (5-5.6 Nm)
Driven Clutch Retaining Bolt Torque:
17 ft. lbs. (23.5 Nm)
Drive Clutch Retaining Bolt Torque:
47 ft. lbs. (64 Nm)
To Next Page
Loading...
Need help?
General
