EasyManuals Logo

Polaris A12MH46AX User Manual

Polaris A12MH46AX
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background image
2.10
MAINTENANCE
© Copyright 2011 Polaris Sales Inc.
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
Transmission Lubrication
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule.
Be sure vehicle is level and in Park before
proceeding.
Check vent hose to be sure it is routed properly
and unobstructed.
Follow instructions to check/change transmission
lubricant.
To Check the Fluid Level:
1. Remove check / fill plug from the left side of
transmission and visually inspect the oil level. Level
is correct when it reaches the bottom of the fill hole
threads.
NOTE: The check/fill plug is a 5/16” hex.
To Change Lubricant:
1. Remove transmission drain plug to drain the oil.
Discard used oil properly.
NOTE: The check/fill plug is a 3/16” hex.
2. Clean and reinstall the drain plug. Torque to
specification.
3. Remove fill plug.
4. Add the correct amount of Polaris AGL Plus Gearcase
Lubricant.
5. Check for leaks.
6. Install fill plug. Torque to specification.
= T
Transmission Check/Fill Plug Torque:
14 ft.lbs. (19 Nm)
CHECK / FILL PLUG
= T
Transmission Drain Plug Torque:
14 ft.lbs. (19 Nm)
=
Transmission - Specified Lubricant:
Polaris AGL Plus Gearcase Lubricant
(Gallon - PN 2878069) (1qt. - PN 2878068)
Capacity: 33.8 oz. (1000 ml)
= T
Transmission Check/Fill Plug Torque:
14 ft.lbs. (19 Nm)
DRAIN PLUG

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris A12MH46AX and is the answer not in the manual?

Polaris A12MH46AX Specifications

General IconGeneral
BrandPolaris
ModelA12MH46AX
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals