9.16
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
PARKING BRAKE DISC (INTL MODEL)
DISC INSPECTION
1. Measure the brake disc with a micrometer. If the thickness of the disc is less than specified, replace the brake disc
(see Chapter 9 – Disc Replacement, page 9.16).
DISC REPLACEMENT
1. Remove the parking brake caliper from the disc (see Chapter 9 – Caliper Removal, page 9.13).
2. Using a 1/2” socket and ratchet, remove the brake disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the new brake disc. Install the mounting bolt and flat washer. Torque the mounting bolt to specification.
TORQUE
Parking Brake Disc Mounting Bolt:
21 ft-lbs (28 Nm)
BRAKE SYSTEM
To Next Page
Loading...
Need help?
General
