Polaris RZR PRO R User Manual

3.30
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
ENGINE INSTALLATION PREPARATION
IMPORTANT
Remove oil filter from engine and place a rag over the
oil filter housing before installation.
1. Remove the engine from the stand using an engine
hoist.
2. Carefully place the engine mounting brackets from
the engine on the mounts from the frame.
3. Install the engine mount isolator nuts and torque to
specification.
TORQUE
Engine Mount Isolator Nuts (Lower):
50 ft-lbs (68 N·m)
4. If the transmission was removed from engine prior to
removal, attach the transmission to engine mounting
fasteners
w
and torque to specification.
TORQUE
Transmission to Engine Fasteners:
40 ft-lbs (54 N·m)
ENGINE / COOLING SYSTEM

Polaris RZR PRO R Specifications

General

Brand	Polaris
Model	RZR PRO R
Category	Offroad Vehicle
Language	English