Polaris RZR PRO R User Manual

5
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
5.21
9. Loosen two hose clamps
r
and remove rubber hose
from the fuel tank.
10.Lift the rear of the fuel tank up first. Carefully pull the
fuel tank out of the vehicle.
INSTALLATION
1. Reverse the removal procedure for fuel tank
installation.
TORQUE
Fuel Tank Fasteners:
15 ft-lbs (20 Nm)
TORQUE
Body Panel Fasteners:
7 ft-lbs (10 Nm)
TORQUE
Seat Base Frame Fasteners:
15 ft-lbs (20 Nm)
TORQUE
Shift Knob Fastener:
35 in-lbs (4 Nm)
TORQUE
Battery Cable Fasteners:
60 in-lbs (7 Nm)
FUEL PUMP OPERATION OVERVIEW
When the key switch is turned to "ON", the ECU
activates the fuel pump, which pressurizes the system for
start-up.
The ECU switches off the pump preventing the continued
delivery of fuel in these instances:
• If the key switch is not promptly turned to the "start"
position.
• If the engine fails to start.
• If the engine is stopped with the key switch "on" (as in
the case of an accident).
In these situations, the check engine light will go on, but
will turn off after 4 cranking revolutions if system function
is OK. Once the engine is running, the fuel pump remains
on.
It is NORMAL to see fuel pressure fluctuations as the
throttle varies.
EFI / FUEL SYSTEM

Polaris RZR PRO R Specifications

General

Brand	Polaris
Model	RZR PRO R
Category	Offroad Vehicle
Language	English