Polaris RZR PRO R User Manual

4
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
4.11
PPS REPLACEMENT
NOTICE
The PPS is calibrated to the throttle pedal. If the PPS is
faulty, the throttle pedal assembly must be replaced.
1. Remove the drivers seat and disconnect the negative
(-) battery cable.
2. Disconnect the PPS harness connection located on
the throttle pedal.
3. Remove the three fasteners
q
retaining the throttle
pedal assembly to the frame.
4. Remove pedal assembly.
5. Reverse procedure for installation. Torque fasteners
to specification.
TORQUE
PPS Mounting Fasteners:
18 ft-lbs (24 Nm)
Battery Cable Fasteners:
60 in-lbs (9 Nm)
OXYGEN SENSOR
OXYGEN SENSOR INFORMATION
The oxygen sensor, located on the exhaust pipe before
the muffler, uses a 4 wire heated element.
2018
CONNECTOR
PIN
WIRE
COLOR
PIN AND WIRE
CONNECTION
A
Purple
Heater Power
B White Heater Ground
C
Gray
Sensor Output
D Black Sensor Ground
ENGINE ELECTRICAL

Polaris RZR PRO R Specifications

General

Brand	Polaris
Model	RZR PRO R
Category	Offroad Vehicle
Language	English