Commands Menu 5-39
22 June 2004
Move Media Dialog
Path: Main Menu Commands Menu Move
Submenu Move Media Dialog
Use the Move Media Dialog to move cartridges between
elements without host intervention. See Figure 5-46.
Figure 5-46 Move Media Dialog
Parameter Value
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present (1–
4).
The third field indicates the
storage cell section (1–4), drive
bay (1–2), or IE station number.
The fourth field indicates the
column of the section (A–E),
drive port (A–B), or IE station
column.
The fifth field indicates the row
of the column.
(01–12 for ½-inch and SDLT/
DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Element Displays the element number
that corresponds to the
coordinate parameter.
Accept Y to accept changes
N to reject changes
Enter SOURCE
Coord: S< 02 1 A 01
OR Element: 00000
Accept : N
To Next Page
Loading...
Need help?
General