Utils Menu 5-97
22 June 2004
RESET Y to accept changes and purge
the barcode label from the
Cleaning database.
N to reject changes
If Y is selected for the Reset parameter value, the changed
parameter values are accepted. Otherwise, the changed
parameters continue to display but no action is taken.
Utils Menu
Path: Main Menu Utils Menu
Use the Utils Menu to perform library utilities. For example,
set screen controls or date and time. See Figure 5-127.
Figure 5-127 Utils Menu
Depending on your selection, you have one of the following
options:
• Library Submenu
• Drives Submenu on page 5-103
Library Submenu
Path: Main Menu Utils Menu Library Submenu
Use the Library Submenu to set your Operator Panel LCD
parameters, change passwords, enable the audio alarm, or set
the time and date. See Figure 5-128.
Figure 5-128 Library Menu
>Library
Drives
>Screen... Date...
Audio...
Dump
Time
...
To Next Page
Loading...
Need help?
General