Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 143 / 247
Parameter
The configuration will be saved to NV automatically.
+CME ERROR: <err>
Maximum Response Time
300ms
Reference
3GPP TS 27.007
<cid> PDP context identifier, a numeric parameter which specifies a particular PDP context
definition. The parameter is local to the TE-MT interface and is used in other PDP
context-related commands. The range of permitted values (minimum value=1) is
returned by the test form of the command
<PDP_type> Packet data protocol type, a string parameter which specifies the type of packet data
protocol
“IP” IPV4
“IPV6”
“IPV4V6”
<APN> Access point name, a string parameter that is a logical name used to select the
GGSN or the external packet data network. If the value is null or omitted, then the
subscription value will be requested
<PDP_addr> A string parameter identifies the MT in the address space applicable to the PDP. If the
value is null of omitted, then a value may be provided by the TE during the PDP startup
procedure or, failing that, a dynamic address will be requested. The allocated address
may be read using the +CGPADDR command
<data_comp> A numeric parameter that controls PDP data compression (applicable for SNDCP only)
(refer to 3GPP TS 44.065)
0 Off (default if value is omitted)
1 On (manufacturer preferred compression)
2 V.42bis
<head_comp> A numeric parameter that controls PDP header compression (refer to 3GPP TS 44.065
and 3GPP TS 25.323)
0 Off
1 On
2 RFC1144
3 RFC2507
4 RFC3095
NOTE
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English