EasyManuals Logo
Home>Quectel>Control Unit>UG Series

Quectel UG Series User Manual

Quectel UG Series
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 162 / 247
10.12. AT+CGEREP Packet Domain Event Reporting
Set command enables or disables sending of unsolicited result codes +CGEV: XXX from MT to TE in the
case of certain events occurring in the Packet Domain MT or the network. <mode> controls the
processing of unsolicited result codes specified within this command. <bfr> controls the effect on buffered
codes when <mode> 1 or 2 is entered.
2 Enable network registration and location information unsolicited result code
+CGREG: <stat>[,<lac>,<ci>[,<Act>]]
<stat> 0 Not registered, MT is not currently searching an operator to register to. The UE is
in GMM state GMM-NULL or GMM-DEREGISTERED-INITIATED. The packet
domain service is disabled, the UE is allowed to attach for packet domain if
requested by the user.
1 Registered, home network. The UE is in GMM state GMM-REGISTERED or
GMM-ROUTING-AREA-UPDATING-INITIATED INITIATED on the home PLMN.
2 Not registered, but MT is currently trying to attach or searching an operator to
register to. The UE is in GMM state GMM-DEREGISTERED or
GMM-REGISTERED-INITIATED. The packet domain service is enabled, but an
allowable PLMN is currently not available. The UE will start a packet domain
attach as soon as an allowable PLMN is available.
3 Registration denied. The UE is in GMM state GMM-NULL. The packet domain
service is disabled, the UE is not allowed to attach for packet domain if requested
by the user.
4 Unknown
5 Registered, roaming
<lac> String type, two bytes location area code in hexadecimal format (e.g. "00C3" equals to 195
in decimal)
<ci> String type, 16 bit (GSM) or 28 bit (UMTS) cell ID in hexadecimal format
<Act> Access technology selected
0 GSM
2 UTRAN
AT+CGEREP Packet Domain Event Reporting
Test Command
AT+CGEREP=?
Response
+CGEREP: (list of supported <mode>s),(list of supported
<bfr>s)
OK
Read Command
AT+CGEREP?
Response
+CGEREP: <mode>,<bfr>
OK
Quectel
Confidential

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quectel UG Series and is the answer not in the manual?

Quectel UG Series Specifications

General IconGeneral
BrandQuectel
ModelUG Series
CategoryControl Unit
LanguageEnglish

Related product manuals