Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 98 / 247
3GPP TS 22.002 lists the allowed combinations of the sub-parameters.
7.14. AT+CSTA Select Type of Address
AT+CSTA write command selects the type of number for further dialing commands ATD according to
3GPP Technical Specifications. Test command returns values supported a compound value.
non-transparent UDI service in order to get FTM)
84 64000 bps (X.31 flag stuffing; this setting can be used in conjunction with
asynchronous non-transparent UDI service in order to get FTM)
115 56000 bps (bit transparent)
116 64000 bps (bit transparent)
120 32000 bps (PIAFS32k)
121 64000 bps (PIAFS64k)
130 28800 bps (multimedia)
131 32000 bps (multimedia)
132 33600 bps (multimedia)
133 56000 bps (multimedia)
134 64000 bps (multimedia)
<name> 0 Asynchronous Modem
1 Synchronous Modem
4 Asynchronous Modem (RDI)
5 Synchronous Modem (RDI)
<ce> 0 Transparent
1 Non-transparent
2 Both, transparent preferred
3 Both, non-transparent preferred
AT+CSTA Select Type of Address
Test Command
AT+CSTA=?
Response
+CSTA: (list of supported <type>s)
OK
Read Command
AT+CSTA?
Response
+CSTA: <type>
OK
Write Command
Response
NOTE
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English