UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 40 / 247
4.3.1. AT+QCFG="urc/port" List All Port(s) or Disable URC of a Specified Port
AT+QCFG="urc/port" lists all available port(s) and current port. It can also disable URC indication of a
specified port.
Parameter
The configuration will be saved to NV automatically.
4.3.2. AT+QCFG="uart/power" Turn on/off the UART Port
AT+QCFG="urc/port" Display All Port (s) and Disable URC of a Specified Port
Write Command
A
T+QCFG="urc/port"[,<
enable>[,<por
t_name>]]
Response
If configuration parameters are omitted:
+QCFG: "
urc/port",<e
nable>,<port_nam
e><port_
t
y
pe>
+QCFG: "
urc/port",<e
nable>,<port_nam
e><port_
t
y
pe>
[……]
OK
If configuration parameters are entered:
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
<enable> 0 Disable URC indication of the port
1 Enable URC indication of the port
<port_name> A string to describe port name
<port_type> 0 Current port
1 All available ports
AT+QCFG="uart/power" Turn on/off the UART Port
Write Command
AT+QCFG="uart/power"[,<mode>]
Response
If <mode> is omitted:
To Next Page
Loading...
Need help?
General
