Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 80 / 247
The configuration will be saved to NV automatically.
6.5. AT+COPN Read Operator Names
The AT+COPN command returns the list of operator names from the ME. Each operator code
<numericn> that has an alphanumeric equivalent <alphan> in the ME memory is returned.
1 Short format alphanumeric <oper>
2 Numeric <oper>
<oper> String type; <format> indicates the format is alphanumeric or numeric (see +COPS)
<GSM> GSM access technology
0 Access technology is not selected
1 Access technology is selected
<GSM_Compact> GSM compact access technology
0 Access technology is not selected
1 Access technology is selected
<UTRAN> UTRAN access technology
0 Access technology is not selected
1 Access technology is selected
AT+COPN Read Operator Names
Test Command
AT+COPN=?
Response
OK
Execution Command
AT+COPN
Response
+COPN: <numeric1>,<alpha1>
[+COPN: <numeric2>,<alpha2>
[…]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
Depends on the number of operator names
Reference
3GPP TS 27.007
NOTE
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English