Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 30 / 247
2.25. AT+CSCS Select TE Character Set
AT+CSCS write command informs the module which character set is used by the TE. It enables the UE to
convert character strings correctly between TE and UE character sets.
Parameter
Example
AT+CSCS? //Query the current character set
+CSCS: "GSM"
OK
AT+CSCS Select TE Character Set
Test Command
AT+CSCS=?
Response
+CSCS: (list of supported <chset>s)
OK
Read Command
AT+CSCS?
Response
+CSCS: <chset>
OK
Write Command
AT+CSCS=<chset>
Response
Set character set <chset> which is used by the TE. The TA
can then convert character strings correctly between the TE
and ME character sets.
OK
Maximum Response Time
300ms
Reference
3GPP TS 27.007
<chset> "UCS2" UCS2 alphabet
"IRA" International reference alphabet
"HEX" UCS2 alphabet
"GSM" GSM default alphabet
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English