UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 94 / 247
RING //Automatically answering the call after three rings
7.9. ATS6 Set Pause before Blind Dialing
ATS6 is implemented for compatibility reasons only, and has no effect.
Parameter
7.10. ATS7 Set Number of Seconds to Wait for Connection Completion
ATS7 specifies the amount of time to wait for the connection completion in case of answering or
originating a call. If no connection is established during the time, the module disconnects from the line.
ATS6 Set Pause before Blind Dialing
<n> 0-2-10 Number of seconds to wait before blind dialing
ATS7 Set Number of Seconds to Wait for Connection Completion
Response
This parameter setting determines the amount of time to wait
for the connection completion in case of answering or
originating a call.
OK
To Next Page
Loading...
Need help?
General
