3
1. Introduction
The ST6000 system section of this manual contains full system operating instructions
and service procedures for the autopilot. Further in depth diagnostics are available
for each module in the relevant product sections.
2. Systems description
The ST6000 is a modular Seatalk compatible autopilot system that can be built up to
match the individual requirements of most vessels and steering systems.
The ST6000 course computer can be used with all Seatalk compatible control units
and ST50 instruments and will operate the following drive units:
Z039 Linear drive type 1
Z037 Rotary drive type 1
Z041 Hydraulic pump type 1
Z081 Hydraulic pump type 0
Z088 I/O Sterndrive
Z064 Type CR 3L/min (via Z085 Interface)
Z066 Type CR 4.5L/min (via Z085 Interface)
To Next Page
Loading...
Need help?
General
