9
— Sounds when the target waypoint number changes. The displayed bearing is to
the new waypoint. PORT or STBD indicates in which direction the autopilot will turn
onto the new waypoint bearing.
Push Track to silence the alarm and automatically steer onto the new bearing to
waypoint.
• Manual Override Alarm
(Installations with stern drive actuators only).
— Sounds for 10 seconds when the autopilot is manually overridden at the steering
wheel. After 10 seconds the autopilot will return to Standby automatically.
Note: Push Standby to silence an alarm and select Standby mode (unless indicated
otherwise).
To Next Page
Loading...
Need help?
General
