Raymarine ST7000 User Manual

Autohelm
AutohelmAutohelm
Autohelm
SeaTalk Service Manual 10
3.2 Additional information for Sailing Vessels
Autotack
The ST6000 has a built in Autotack function
which will turn the vessel through 100°. This
operates in both compass and vane modes
as follows:-
Vane
Push +1 and +10 keys
together to initiate a tack
turning to Starboard.
Push –1 and –10 keys
together to initiate a tack
turning to Port.
Note: It is important that the rudder angle
transducer is accurately aligned as the
Autotack function mirrors standing helm and
any offset will change the initial tack angle.
Wind Trim (Windvane Operation)
Wind Trim allows the autopilot to be
supervised by apparent wind direction. The
wind direction is read either:-
— From the SeaTalk bus (requires
Autohelm ST 50 unit).
OR
— From an NMEA 0183 input on the control
unit.
Push both red keys together
to select Wind Trim and
maintain the current
apparent wind angle.
Push and hold down for 1
second both red keys
together to return to the
previous apparent wind
angle.
Automatic Heading
Previous Automatic
Heading

Raymarine ST7000 Specifications

General

Brand	Raymarine
Model	ST7000
Category	Marine Equipment
Language	English