Network Administrator Settings
The network administrator settings that can be specified are as follows:
System Settings
The following settings can be specified.
Interface Settings
If DHCP is set to On, the settings that are automatically obtained via DHCP cannot be specified.
• Network
All the settings can be specified.
Administrator Tools
• Admin. Auth. Management
Network Management
• Program / Change Admin.
Network Administrator
You can specify the user name and change the full-control user's authority.
• Extended Security
Driver Encryption Key
Settings by SNMP V1 and V2
Simple Encryption
• Network Security Level
Settings via Web Image Monitor
The following settings can be specified.
Device Settings
• System
Device Name
Comment
Location
• Administrator Authentication Management
Network Administrator Authentication
Available Settings for Network Administrator
Network Administrator Settings
207