Printer
If you have specified administrator authentication, the available functions and settings depend on the menu
protect setting.
The following settings can be specified by someone who is not an administrator.
• Abbreviations in the table columns
R/W (Read and Write) = Both reading and modifying the setting are available.
R (Read) = Reading only.
N/A (Not Applicable) = Neither reading nor modifying the setting is available.
The default for [Menu Protect] is [Level 2].
Printer Basic Settings
System
Settings Off Level 1 Level 2
Print Error Report R/W R N/A
Auto Continue R/W R N/A
Memory Overflow R/W R N/A
Rotate by 180 Degrees R/W R N/A
Blank Page Print R/W R N/A
Sub Paper Size R/W R N/A
Letterhead Setting R/W R N/A
Bypass Tray Setting Priority R/W R N/A
Extended Auto Tray Switching R/W R N/A
Virtual Printer R/W R N/A
Host Interface
Settings Off Level 1 Level 2
I/O Buffer R/W R R
I/O Timeout R/W R R
PCL Menu
9. Appendix
232