7. Environmental Conservation
Energy Saving
Energy Saver Modes
Customers should use energy saver modes properly, to save energy and protect the environment.
Energy Saver Modes Description
Energy Saver Mode 1 Lower the fusing temperature.
Energy Saver Mode 2
(Sleep Mode)
No power is supplied to the printing engine, and almost none to the
controller.
When the machine is not being used, the machine enters energy saver mode to reduce the power
consumption by lowering the fusing temperature.
The area shaded gray in this diagram represents the amount of energy that is saved when the timers are
at the default settings (1 minute). If the timers are changed, then the energy saved will be different. For
example, if the timers are all set to 240 minutes, the gray area will disappear, and no energy is saved
before 240 minutes expires.
185
To Next Page
Loading...
Need help?
General
