Printable Area and Margin
4.0 ± 2.5 mm (0.16 ± 0.10 inches)
EAT900
Approx. 4.0 mm (0.16 inches) 4.0 ± 2.5 mm (0.16 ± 0.10 inches)
Approx. 4.0 mm (0.16 inches)
• The machine does not support edge-to-edge printing. To minimize the margins, specify the
maximum printable area with the settings on the printer driver.
• See "Maximizing the Printable Area When Printing", User Guide (Full Version).
• The printable area may vary due to the paper size or settings of the printer driver.
• The outside of the printable area can be printed due to the settings of the printer driver or printing
condition; however, the print result may be different from the intended one or the paper may not be
fed correctly.
• The print area may vary depending on the paper size, printer language, and printer driver settings.
• Depending on the printer driver settings, you may be able to print outside the recommended print
area. However, the actual output may not come out as desired, or a paper feed problem may
occur.
6. Specifications for the Machine
146
To Next Page
Loading...
Need help?
General
