1. Test pattern for mode A
When printing by mixing the upper nozzles and lower nozzles
2. Test pattern for mode B
When printing by using only the upper nozzles
3. Test pattern for mode C
When printing by using only the lower nozzles
7. Select the optimal mode that you checked in Step 6 from [A], [B], or [C].
8. Press [Print Head Alignment].
9. Press [On].
10. Press [Close] twice.
11. Press [End].
The connection method for the print heads will be applied to the first printing job after these settings
are configured.
Performing the Connection Method for the Media Feed
Feeds media by overlaying the image, and then performs image processing to the overlaid parts.
Performing the connection method for the media feed can reduce image quality defects if the defects
appear in connection parts of media feed.
1. Press the [Standard Procedure] key.
3. Convenient Usage
110
To Next Page
Loading...
Need help?
General
