Default: [On]
Language
Select the display language on the control panel.
Depending on the destination, the default value is changed.
The following languages can be set:
[Japanese], [English], [French], [German], [Italian], [Spanish], [Dutch], [Portuguese], and [Russian]
Media Display Settings
You can specify and display the remaining amount of media.
Remaining Media
Specify the remaining amount of media to be displayed on the home screen.
(mainly Europe and Asia)
Default: [0.0 m]
The remaining amount of media can be set from 0.0 to 300.0 m, using the number keys.
(mainly North America)
Default: [0.0 feet]
The remaining amount of media can be set from 0.0 to 984.3 feet, using the number keys.
Display Remaining Media
Specify whether to display the remaining amount of media on the home screen.
• On
• Off
Default: [Off]
Time and Timer Settings
Configure the time and timer settings for the machine.
Sleep Mode Transition Time
After a specified period has passed, the machine enters Sleep mode in order to conserve energy.
Specify the time to elapse before Sleep mode.
Default: [30 minute(s)]
The transition time can be set from 10 to 60 minutes, using the number keys.
Cooling Mode
Specify whether to allow the pre-heater, print heater, and post-heater to enter Cooling mode after
a specified period has passed. In Cooling mode, setting the temperature of the heaters lower than
4. Configuring and Managing the Machine
138
To Next Page
Loading...
Need help?
General
