SM Appendix 2-3 M154/M155/M174/M175/A0A7/M287/M0BB
Error and Status Indicate on the Control Panel
The LED on the operation panel indicates the machine status, including any errors.
LED Status Solution
Toner/
Paper
End
Alarm Power
- - On The power is on. The status is normal.
- - Flashing Importing data. The status is normal.
Flashing - On The print cartridge is
almost empty.
Replace the print cartridge
before it becomes empty.
On - On The print cartridge
is empty.
The print cartridge
is not set correctly.
The tray has run
out of paper.
Replace the print
cartridge.
Set the print cartridge
again correctly.
Load paper into the
tray.
- Flashing On A paper jam has
occurred in the
machine.
Use Web Image Monitor or
Smart Organizing Monitor
to determine where the
paper jam is, and then
remove the jammed paper.
See the user’s guide
"Paper Feed Problems".
- On On The size of paper to
print on and the
size of the paper
loaded in the tray
do not match.
A cover is open.
Use Web Image
Monitor or Smart
Organizing Monitor to
check the paper size
settings, and then
change either the size
of paper to print on or
the size of paper
loaded in the tray.
Confirm that all the
covers are closed
completely.
- On On Another type of error
has occurred.
Use Web Image Monitor or
Smart Organizing Monitor