• Coated or other paper producing higher paper-to-paper friction is used.
• Thin or other limp paper is used.
Solution:
Reduce the number of sheets to be stapled.
1. In the [Finishing: Finisher] group on the [Adjustment Settings for Operators] menu, select
0606: [Number of Sheet Align for Stapling], and reduce the number of sheets to be
stapled.
2. Print the image. Has the problem been resolved?
Yes Finished!
No If the problem persists even though the setting has reached its minimum value,
contact your service representative.
• If the number of sheets to be stapled is reduced, paper alignment will take longer, compromising
the machine's throughput.
Misfeeding of Sheets Other Than the Cover Has Occurred
Cause
Misfeeding of sheets other than the cover has occurred in the tray for booklet folding.
This may occur if:
• Attempted booklet folding of paper with high image density at the folds.
• Attempted booklet folding of a bundle of 15 or more sheets.
• The temperature or humidity is low.
Solution:
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [Copier (Classic)] icon.
3. Press [Dup./ Combine/ Series] on the copier screen.
4. Press [Book].
5. Select [1 Sided] or [2 Sided] for [Original:].
9. Post-Processing Option Troubleshooting
136
To Next Page
Loading...
Need help?
General
