Shrunken Image
The leading edge margin is too narrow and the image has shrunk lengthwise.
Paper feed direction
Original
Output
CEZ528
The paper has creased and no print appears where the crease has occurred.
Paper feed direction
Output
Original
CEZ529
Cause:
The paper feed speed of the transfer timing roller is too high.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
Decrease the feed speed of the transfer timing roller.
1. In [Advanced Settings] for the custom paper you are using, select 1341: [Motor Speed]
and reduce the value in [Transfer Timing Roller] by 0.1%.
7. Image Quality Problem: Full Page
80
To Next Page
Loading...
Need help?
General
