Roland Fantom XR User Manual

213
Effects List
72: ENH → CHORUS
(ENHANCER → CHORUS)
fig.MFX-72
73: ENHANCER → FLANGER
(ENH → FLANGER)
fig.MFX-73
74: ENH → DELAY
(ENHANCER → DELAY)
fig.MFX-74
75: CHORUS → DELAY
fig.MFX-75
Parameter
Value Description
Enh Sens #
0–127 Sensitivity of the enhancer
Enh Mix # 0–127 Level of the overtones generated
by the enhancer
Cho Pre Delay 0.0–100.0 ms Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Cho Rate # 0.05–10.00 Hz, note Frequency of modulation
Cho Depth 0–127 Depth of modulation
Cho Balance # D100:0W–D0:100W Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Level 0–127 Output Level
Parameter
Value Description
Enh Sens #
0–127 Sensitivity of the enhancer
Enh Mix # 0–127 Level of the overtones generated
by the enhancer
Fln Pre Delay 0.0–100.0 ms Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Fln Rate # 0.05–10.00 Hz, note Frequency of modulation
Fln Depth 0–127 Depth of modulation
Fln Feedback # -98– +98 % Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Fln Balance # D100:0W–D0:100W Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Level 0–127 Output Level
Chorus
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Flanger
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Parameter
Value Description
Enh Sens #
0–127 Sensitivity of the enhancer
Enh Mix # 0–127 Level of the overtones generat-
ed by the enhancer
Delay Time 0–2600 ms, note Adjusts the delay time from the
direct sound until the delay
sound is heard.
Delay
Feedback #
-98– +98 % Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Delay HF Damp 200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Delay Balance # D100:0W–D0:100W Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
Parameter
Value Description
Cho Pre Delay
0.0–100.0 ms Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Cho Rate # 0.05–10.00 Hz, note Frequency of modulation
Cho Depth 0–127 Depth of modulation
Cho Balance # D100:0W–D0:100W Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Delay Time 0–2600 ms, note Adjusts the delay time from the
direct sound until the delay sound
is heard.
Delay
Feedback #
-98– +98 % Adjusts the proportion of the de-
lay sound that is fed back into the
effect. Negative (-) settings will in-
vert the phase.
Delay HF Damp 200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the effect
will be cut. If you do not want to
cut the high frequencies, set this
parameter to BYPASS.
Delay
Balance #
D100:0W–D0:100W Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Level 0–127 Output Level
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
Fantom-XR_r_e.book 213 ページ ２００６年４月４日 火曜日 午前１０時１４分

Roland Fantom XR Specifications

General

Brand	Roland
Model	Fantom XR
Category	Synthesizer
Language	English