48
FA ROTEX HPSU compact (V5) •
6 x Decommissioning
6.2 Final shutdown
A final shutdown may be necessary if
– the system is defective and is being dismantled and disposed
of.
– components of the system are
defective, are being disman-
tled and replaced.
– the system or parts of the system are being dismantled and
re
assembled in another location.
The ROTEX HPSU compact is designed to be environmentally
frien
dly and easy to install: the jobs described above can
therefore be carried out in an efficient and environmentally-
friendly manner.
When changing location or replacing
parts on the coolant system
in the pipe network:
Ɣ Pump the coolant back into the external heat pump unit (see
installation and operating guide for the particular external
heat pump unit).
When disposing of the machine or replacing parts in the coolant
system:
Ɣ Suction the coolant from the machine and recycle (see instal-
lation and operating guide for the particular external heat
pump unit).
Ɣ Decommissioning a ROTEX HPSU compact
(see section 6.1).
Ɣ Discon
nect the ROTEX HPSU compact from all electrical
connections, refrigerant and water connections.
Ɣ Dismantle
the ROTEX HPSU compact or components in
accordance with the installation guide in reverse order.
Ɣ ROTEX HPSU compact disposed off in a professional
manner.
Recommendations for disposal
The ROTEX HPSU compact has an environmentally friendly
design. During the disposal process, the only waste accrued is
that which can be used for material or thermal recycling. The ma-
terials used that are suitable for recycling can be
sorted into indi-
vidual types.
WARNING!
Cooling systems (heating pumps),
climate control systems and heating de-
vices that are incorrectly dismantled can
both endanger the life and health of
people and exhibit impaired function
during start-up.
Ɣ Work on the ROTEX HPSU compact
(such as dismantling components,
temporary or final shutdown of
system) is only to be carried out by
persons who are authorised and who
have successfully completed quali-
fying technical or vocational
training for the specific activity and
who have taken part in advanced
training sessions recognised by the
relevant responsible authorities.
These include, in particular, certified
heating engineers, qualified electri-
cians and HVAC specialists, who on
account of their professional
training and expert knowledge,
have experience in the professional
installation and maintenance of
heating, cooling and air conditioning
systems and heat pumps.
Ɣ You must observe the warning and
safety instructions in the installation
manual on working in the coolant
system.
CAUTION!
Coolant escaping from the system
causes long-term damage to the envi-
ronment.
Mixing different kinds of coolant can
result in hazardous toxic gases being
released. Mixing with oils when coolant
escapes can lead to the soil being con-
taminated.
Ɣ Never allow coolant to be released
into the atmosphere - always suction
it off and recycle using a suitable
recycling device.
Ɣ Always recycle coolant, in so doing
keeping it separated from oils and
other additives.
Ɣ Only keep each type of refrigerant
separate in suitable pressure vessels.
Ɣ Dispose of coolants, oils and
additives properly and in accordance
with the applicable national regula-
tions of the country it is being used in.
ROTEX has complied with the standards for environ-
mentally-friendly disposal as a result of the environ-
mentally-friendly design of the ROTEX HPSU compact.
Prop
er disposal in compliance with the respective
national regulations of the country of use is the respon-
sibility of the user/owner.
To Next Page
Loading...
Need help?
General
