Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth
device. When devices are paired, a passcode (PIN Code) is
shared between devices, allowing for fast, secure connections
while bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Press to access the main menu.
2. Select Tools.
3. Select Bluetooth.
4. Select <Add New>.
5. Select Search. (Your phone will display a list of discovered
in-range Bluetooth devices.)
6. Select the device you wish to pair with and press .
7. Select Add to Trusted.
8. Enter the passcode and press . (When the owner of the
other device enters the same code, the pairing is complete.)
Note: Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible.
Waiting for Request
If you are going to be using a Dial-Up Network (DUN) profile to
pair with a PC or PDA, you will need to allow the other device to
initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1. Follow steps 1-4 above.
2. Select Wait for Request.
3. Follow the onscreen prompts to enter your passcode and
press .
122
To Next Page
Loading...
Need help?
General
