Sanyo Katana Cell Phone User Manual

Making Calls
To place a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number from standby mode. (If you make a
mistake while dialing, press to erase one digit at a time.
Press and hold to erase the entire number.)
3. Press or .
4. When you’re finished, press .
To place a call with the flip closed:
1. Make sure your phone is on.
2. Press and hold
up or down
on the left side of the phone.
3. Follow the system prompts. (The call will be made in
speakerphone mode, unless you have a headset or other
accessory attached to the phone.)

Say the name of your registered Voice tag (see the note below)
or press up or down again to redial.
Note: To use a Voice Dial, you must have stored Voice tags. (See
“Programming Voice Tag to Your Phone” on page 86.)
Note: This function is available only when the Side Key Guard setting is
off. To temporarily deactivate the feature, see “Setting the Side Key
Guard” on page 50.
11

Sanyo Katana Cell Phone Specifications

General

Brand	Sanyo
Model	Katana Cell Phone
Category	Cell Phone
Language	English