Sega Let’s Go ISLAND! User Manual

6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2-1 LIMITATION OF USAGE
● Besuretochecktheelectricalspecications.Ensurethatthisproduct
iscompatiblewiththelocation'spowersupply,voltage,andfrequency
requirements.Aplatedescribingelectricalspecicationsisattachedtothe
product.Non-compliancewiththeelectricalspecicationscancauseareand
electric shock.
● This
productrequiresabreakerandearthmechanismaspartofthelocation
facilities.Usingtheproductwithoutthesecancauseareandelectricshock.
● Besuretouseanindependentpowersupplyequippedwithanearthleakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak
ofreifapowersurgeoccurs.
● Puttingmanyloadsononeelectricaloutletcancausegenerationofheatanda
reresultingfromoverload.
● Ensurethattheindoorwiringforthepowersupplyisratedat15Aorhigher
(AC single phase 100 V - 120 V area), and 7 A or higher (AC 220 V - 240 V area).
NoncompliancewiththeElectricalSpecicationscancauseareandelectric
shock.
● When
usinganextensioncord,ensurethatthecordisratedat15Aorhigher
(AC100 V -120 V area) and 7 A or higher (AC 220 V - 240 V area). Using a cord
ratedlowerthanthespeciedratingcancauseareandelectricshock.
Electricity Consumption
AC 220 V, 50 Hz Area 3.6 A
AC 220 V, 60 Hz Area 3.5 A
AC 230 V, 50 Hz Area 3.5 A
AC 110 V, 60 Hz Area 6.8 A
2

Sega Let’s Go ISLAND! Specifications

General

Brand	Sega
Model	Let’s Go ISLAND!
Category	Arcade Game Machines
Language	English