83
PERIODIC INSPECTION
PERIOD ITEMS DESCRIPTION REFERENCE
As appropriate CABINET SURFACES Cleaning As below
FLUORESCENT LAMP Inspection As above
Daily CABINET Conrm that adjusters contact oor Chapter 3
SAFETY DEVICES
Weekly LCD Screen cleaning 12-2
Check monitor adjustments 12-3
Monthly START BUTTON, Check switches and lamps Chapter 11
CONTROLLER Inspect volume Chapter 13
COIN SELECTOR Coin switch inspection Chapter 15
Coin insertion test 15-1
RINGWIDE Settings check
Chapter 10, S/M
Every 3 months CONTROLLER Inspect gear meshing 13-1-1,13-2-1
Apply grease 13-1-3,13-2-3
COIN SELECTOR Cleaning 15-2
1 year RINGWIDE Cleaning 19-2
POWER PLUG Inspection, Cleaning As above
FRONT CABINET INTERIOR Cleaning As below
■PERIODIC
INSPECTIONTABLE
CLEANING THE CABINET SURFACES
When the cabinet surfaces become dirty, remove stains with a soft cloth soaked in water or diluted (with water)
chemical detergent and then wrung dry. To avoid damaging the nish, do not use such solvents as thinner, benzene,
etc. (other than ethyl alcohol) or abrasives (bleaching agent and chemical dust-cloth).
Some general-purpose household, kitchen, and furniture cleaning products may contain strong solvents that degrade
plastic parts, coatings, and print. Before using any cleaning product, read the product’s cautionary notes carefully
and test the product rst on a small area that is not highly visible.
16
To Next Page
Loading...
Need help?
General
