2-29
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
The paper size that appears in the [Original] key is the paper size that is set in "Default Original Size Settings" in the system settings (administrator).
To change the original size to a different size from the size shown in the [Original] key, touch the [Original] key and set the original size.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
Specifying the orientation of the original
By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly recognized.
Finishing position settings and N-Up layout settings are specified using the recognized orientation.
Specifying the orientation and size of an inch-size original
Set the orientation and size of the original before scanning the original.
1
Tap the [Original] key to set the orientation of the original.
â–º COPY MODE (page 2-3)
2
Tap the [Size] tab.
3
Specifying the size of an original
(1)Tap the [AB] key for an AB original size.
Tap the [Inch] key for an inch original size.
(2)Tap the appropriate original size key.
After the settings are completed, tap the key.
4
Tap the appropriate original size key.
CA
Preview
Copies
Size
Image
Orientation
Start
Original
8½x11
8½x11
8½x11
Preview
Others
No. of copies
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Start
1
CA
5 ½x8 ½
8 ½x13
8 ½x11
8 ½x14
8 ½x13
2
/
5
8½x11
In Easy mode In Normal mode
8½x11 8½x135½x8½
8½x148½x13½
(1) (2)
To Next Page
Loading...
Need help?
General
