2-38
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
STAPLE SETTINGS
Specify whether or not the set of output will be stapled.
Staple ON (excluding booklet)
Original Orientation Staple Staple Position
- OFF Does not staple.
Portrait orientation
ON
Landscape orientation
You can view staple positions on the "PREVIEW SCREEN (page 1-15)". Text will be printed at the preset size regardless of
the copy ratio or paper size setting.
An inner finisher is required to use the staple function.
1
Tap the [Staple] key.
â–º COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
â–º Specifying the orientation of the original (page 2-29)
2
Make sure the staple icon appears.
In normal mode
A checkmark appears on the staple icon.
To Next Page
Loading...
Need help?
General
