EasyManuals Logo

Siemens 8DJH Series User Manual

Siemens 8DJH Series
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Installation
62 Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9
11.3 Intermediate storage
If the comprehensive accessories, the delivered switchgear or parts thereof have to be
stored before installation, a suitable storage room or place has to be selected and
prepared.
Intermediate storage of the transport units:
In original packing as far as possible
Switchgear with secondary system: Observe the permissible storage temperature
from -25° C to +70° C in accordance with the installed secondary devices.
Switchgear without secondary system: Observe the permissible storage temperature
from -40° C to +70° C.
In a weatherproof place
Protected against damage
If packed in seaworthy crates, the switchgear can be stored for a maximum of
6 months (desiccant bags)
Store transport units in such a way that they can be taken out later in the correct order
for installation.
Switchgear storage in
closed rooms
As a rule, the switchgear should be stored in a closed room. The storage room must
have the following characteristics:
Floor with adequate load-bearing capacity (weights as per delivery note)
Even floor to enable stable storage
Well-ventilated and free of dust as far as possible
Dry and protected against humidity and vermin (e.g. insects, mice, rats)
Check humidity in the packings every 4 weeks (condensation)
Do not unpack small parts to avoid corrosion and loss.
DANGER!
Risk of injury and damage to the stored goods if the storage space is overloaded.
Ö Observe the load-bearing capacity of the floor.
Ö Do not stack the transport units.
Ö Do not overload lighter components by stacking.
ATTENTION!
Fire risk. The transport unit is packed in flammable materials.
Ö No smoking.
Ö Keep fire extinguishers in a weatherproof place.
Ö Mark the location of the fire extinguisher.
ATTENTION!
Supplied desiccant bags lose their effectiveness if they are not stored in
the undamaged original packings.
Ö Do not damage or remove packing of desiccant bags.
Ö Do not unpack desiccant bags before use.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens 8DJH Series and is the answer not in the manual?

Siemens 8DJH Series Specifications

General IconGeneral
Insulation mediumSF6 gas
EnclosureMetal-enclosed
TypeGas-insulated switchgear
Operating mechanismSpring mechanism
DimensionsVaries depending on configuration
WeightVaries depending on configuration

Related product manuals