16/93
Building Technologies Division User Manual RWF55... CC1U7867en
Infrastructure & Cities Sector 3 Installation 05.11.2013
3.5 Removing the controller from the panel cutout
Attention!
When removing the controller, make certain that all cables are disconnected and that
they do not get squeezed between control panel and housing.
3.6 Cleaning the front
The front of the controller can be cleaned with normal washing/rinsing agents or
detergents.
Attention!
The front of the controller is not resistant to corrosive acids, caustic solutions and
abrasive cleaners. Do not clean with high-pressure cleaners!
To Next Page
Loading...
Need help?
General
