27/93
Building Technologies Division User Manual RWF55... CC1U7867en
Infrastructure & Cities Sector 5 Operating modes 05.11.2013
5.3 Burner shutdown
In the event of a sensor failure, the controller cannot monitor the actual value of the
boiler temperature (analog input InP1). Burner shutdown will automatically be triggered
to guard against overheating.
The same applies to acquiring the external setpoint using analog input InP2.
- Burner off
- 3-position output for closing the controlling element
- Self-setting function is ended
- Manual control is ended
Functions
To Next Page
Loading...
Need help?
General
