F-TM ServoDrive
Equipment Manual, 02/2020, A5E47579503-AA
13
Basic safety information
Observe the safety information.
Electric shock when an unsuitable power supply is connected
Electric shock when an unsuitable power supply is connected
If an unsuitable power supply is connected, exposed parts may carry hazardous voltages.
Contact with hazardous voltages can result in severe injuries or death.
• Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV
(Protective Extra Low Voltage) output voltages for all connections and terminals of the
electronics modules.
Electric shock with damaged devices
Electric shock with damaged devices
Incorrect handling can damage devices. Hazardous voltages can be created at the housing
or at exposed components if devices are damaged, and can cause death or serious injury if
parts are touched.
• Ensure compliance with the limits specified in the technical data during transport,
storage and operation.
• Never use damaged devices.
To Next Page
Loading...
Need help?
General
