Siemens SIMATIC ET 200SP F-TM User Manual

F-TM ServoDrive
97 Equipment Manual, 02/2020, A5E47579503-AA
Technical specifications
11
11.1 Technical specifications of the ET 200SP F-TM ServoDrive
Technical specifications of the F-TM ServoDrive
Article number
6BK1136-6AB00-0BU0
General information
Product type designation F-TM ServoDrive 1x24 ... 48 V 5 A ST
HW functional status
V1.0
Firmware version V1.0
• FW update possible
Yes
Product description
Control of EC motors
usable BaseUnits BU type U0
Product function
• I&M data
Yes
• Isochronous mode
No
• Four-quadrant operation
Yes
• Safety Functions
Yes; Drive controller with hardwired STO
Protection function
• Undervoltage protection
Yes
• Overvoltage protection
Yes
• Overload protection
Yes
• Ground-fault protection
No
• Short-circuit protection
Yes
Installation type/mounting
Type of ventilation
Convection cooling
Supply voltage
Design of the power supply
24 ... 48 V DC, SELV / PELV
permissible range, lower limit (DC)
16.8 V
permissible range, upper limit (DC)
57.6 V
Input current
Current consumption (rated value)
6 A
Current consumption, max.
10 A
Current consumption for the electronics, max.
0.1 A
Inrush current, max.
25 A; at 24 V

Siemens SIMATIC ET 200SP F-TM Specifications

General

Brand	Siemens
Model	SIMATIC ET 200SP F-TM
Category	Servo Drives
Language	English