Siemens SIMATIC HMI KTP700F Mobile User Manual

Configuring the Mobile Panel
6.1 Configuration in WinCC
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
169
6.1.2
Adding the Mobile Panel to the project
Requirement
● A project is open.
● A controller has been added to the project.
● Subnet and IP address of the controller are configured.
Procedure
1. Double-click "Add new device" in the project tree.
2. In the "Add new device" dialog, click "HMI".

Siemens SIMATIC HMI KTP700F Mobile Specifications

General

Brand	Siemens
Model	SIMATIC HMI KTP700F Mobile
Category	Touch Panel
Language	English