Siemens SIMATIC HMI KTP700F Mobile User Manual

Fail-safe operation
9.3 Safety-related dialogs
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
213
9.3.2
"Confirm communication error" dialog
The following message is displayed when PROFIsafe communication is available again after
a communication error.
Acknowledge the communication error with the enabling button or confirm the
communication error on the fail-safe controller.
9.3.3
"Fatal Error" dialog
If the fail-safe module detects a serious error, the fail-safe automation system outputs the
"Fatal error" alarm. The fail-safe module must then be reset.
Note
This message may also occur if the Mobile Panel overheats. Check the ambient conditions.

Siemens SIMATIC HMI KTP700F Mobile Specifications

General

Brand	Siemens
Model	SIMATIC HMI KTP700F Mobile
Category	Touch Panel
Language	English