PIN Signal name Signal type Meaning
4 ---- ---- Reserved, do not use
5 ---- ---- Reserved, do not use
6 RXN I Receive data -
7 ---- ---- Reserved, do not use
8 ---- ---- Reserved, do not use
A + (24 V) VO Power supply for DRIVE-CLiQ, 450 mA maximum
B M (0 V) VO Ground to 24 V
Signal type: I = Input; O = Output; VO = Voltage Output
Additional references
●
SINAMICS S120 Control Units and Additional System Components
Manual
●
SINAMICS S120 Booksize Power Units
Manual
●
SINAMICS S120 for AC Drives
Manual
●
SINAMICS S120
Commissioning Manual
●
Terminal Modules TM15 and TM17 High Feature
Commissioning Manual
●
TM15/TM17 High Feature
Manual
For the order numbers, see the
Overview of SIMOTION documentation
(separate document)
4.3 PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)
PROFINET is an open component-based industrial communication system using Ethernet for
distributed automation systems.
SIMOTION D4x5‑2 DP/PN has a PROFINET interface with three ports (X150 P1-P3) onboard.
The PROFINET interface supports operation of a SIMOTION D4x5‑2 DP/PN as an IO controller
and/or as an I device.
Interfaces
4.3 PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)
SIMOTION D4x5-2
54 Manual, 04/2014
To Next Page
Loading...
Need help?
General
