Simplicity 1692024 User Manual

5 Electrical Troubleshooting
Seat Switch / Clutch / Brake Switch Tests
5 - 18
Figure 28. Test Seat Switch (Electrical)
Figure 29. Test Clutch / Brake Switch (Mechanical)
C. Test Seat Switch (Electrical)
1. Raise seat and disconnect the harness plug.
2. Set VOM to Ohms.
3. Connect probes to seat switch terminals. The VOM
should read no continuity.
4. Depress seat switch. The meter should show conti-
nuity.
D. Test Clutch / Brake Interlock Switch
(Mechanical, Later Models Only)
1. Release the parking brake.
2. Check the clutch / brake switch. The switch button
should not be depressed.
3. Set the parking brake.
4. Check the clutch / brake switch. The switch button
should be depressed.
E. Test Clutch / Brake Interlock Switch
(Electrical, Later Models Only)
1. Release the parking brake.
2. Remove the plug from the clutch/brake pedal inter-
lock switch.
3. Set the VOM to Ohms and probe the terminals of the
switch. It should read no continuity.
4. Set the parking brake. The VOM should show conti-
nuity.
Clutch /
Brake
Switch
Figure 30. Test Clutch / Brake Switch (Electrical)
Clutch /
Brake
Switch

Simplicity 1692024 Specifications

General

Brand	Simplicity
Model	1692024
Category	Tractor
Language	English