6 - 52
6 General Repair
6C Foot Controls Repair
Brake Rod Service - Tuff Torq K215A
1. Remove the mower deck to provide easier access to
linkage components.
2. Remove the nut (A, Figure C–24) and washer that
secure the brake rod guide (D) to the idler arm
assembly. Remove the brake rod guide from the
idler arm assembly.
3. Remove the cotter pin and washer that attaches the
brake rod (E) to the transmission. Remove the brake
rod assembly.
Inspect the components for damage and replace as
necessary.
Reinstall in reverse order of disassembly.
Figure C–24. Tuff Torq K215A Brake Rod Linkage
A. 5/16-18 ESNA Hex Locknut
B. Flat Washer
C. Compression Spring
D. Rod Guide Assembly
E. Brake Rod
F. Cotter Pin
G. Extension Spring
H. Plain Washer
I. Curved Spring Washer
E
F
C
B
A
D
I
A
H
G
Note: Unless specified, use torque
specifications shown on standard
hardware torque specification
chart.
Brake Control Linkage -
Tuff Torq K215A Models
REF.
LTR. QTY. DESCRIPTION
REF.
LTR. QTY. DESCRIPTION
To Next Page
Loading...
Need help?
General
