F
LASH
/F
ILE
C
OMMANDS
3-25
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the
system displays all files.
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
Use this command to display which files booted.
Default Setting
None
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and
Config file.
startup Shows if this file is used when the system is
started.
size The length of the file in bytes.
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -----------
diag_0060 Boot-Rom image Y 111360
run_01642 Operation Code N 1074304
run_0200 Operation Code Y 1083008
Factory_Default_Config.cfg Config File N 2574
startup Config File Y 2710
-------------------------------------------------------------------
Total free space: 0
Console#
b_mgmt.book Page 25 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
