SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

Index-1
Numerics
802.1x
configure 2-131
, 2-134
A
address table 2-47
B
BOOTP 2-13
broadcast storm, threshold 2-41
C
Class of Service
configuring 2-87
queue mapping 2-87
community string 2-107
configuration settings, saving or
restoring 2-28
D
default priority, ingress port 2-87
default settings 1-14
DHCP 2-13
downloading software 2-26
dynamic addresses, displaying 3-109
E
edge port, STP 3-125
F
firmware version, displaying 2-34
firmware, upgrading 2-26
H
hardware version, displaying 2-34
HTTP, secure server 3-35
HTTPS 3-35
I
IEEE 802.1D 3-115
IEEE 802.1w 3-115
IGMP, configuring 2-113
ingress filtering 2-84
IP address
BOOTP/DHCP service 2-13
setting 2-11
L
link type, STP 3-127
log-in
CLI 3-1
Web interface 2-2
logon authentication
RADIUS server 2-16
TACACS server 2-16
M
main menu 2-5
mirror port, configuring 2-42
multicast
configuring 2-113
router 2-117
, 3-158
I NDEX
b_mgmt.book Page 1 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Ports	8
Port Type	10/100/1000 Mbps
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table Size	8K
Power over Ethernet (PoE)	Yes
Input Voltage	100-240VAC
Form Factor	Desktop/Rackmount
Features	VLAN, QoS, IGMP Snooping
Dimensions	280 x 180 x 44 mm
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Jumbo Frame Support	Yes (9K bytes)

Summary

LIMITED WARRANTY

Limited Warranty Statement

Formal explanation of warranty terms and conditions for SMC products.

Switch Management

Connecting to the Switch

Describes various methods to establish management access to the switch.

Basic Configuration

Covers essential initial setup steps for the switch's operation.

Security

Details methods to secure the switch against unauthorized access.

Port Configuration

Manages individual network port settings like speed, duplex, and status.

Spanning Tree Protocol Configuration

Configures STP to prevent network loops and ensure optimal topology.

Configuring the Switch

Using the Web Interface

Provides an overview of the switch's graphical management interface.

Basic Configuration

Covers essential initial setup steps for the switch's operation.

Security

Details methods to secure the switch against unauthorized access.

Managing Firmware

Describes procedures for updating the switch's operating software.

VLAN Configuration

Enables network segmentation by grouping ports into virtual LANs.

Command Line Interface

Using the Command Line Interface

Overview of accessing and navigating the switch's Command Line Interface.

General Commands

Basic commands for CLI operation and system control.

System Management Commands

Commands for managing system settings, logs, and user accounts.

IP Commands

Commands for configuring IP addressing and network connectivity.

Interface Commands

Commands for configuring individual network port settings.

Troubleshooting

Troubleshooting Chart

A guide to diagnosing and resolving common connectivity and configuration issues.

Upgrading Firmware via the Serial Port

Glossary